Loading...

BMR Fabrication


BMR Fabrication (Front Only) Sway Bar End Links ELK005

CODE: BMRELK005

$199.95
BMR Fabrication
Reduce End Link deflection and increase sway bar effectiveness with heavy duty Sway Bar End Links from BMR Fabrication. Upgrading sway bars on this... More

BMR Fabrication (Rear Only) Sway Bar End Links ELK006

CODE: BMRELK006

$129.95
BMR Fabrication
Reduce End Link deflection and increase sway bar effectiveness with heavy duty Sway Bar End Links from BMR Fabrication. Upgrading sway bars on this... More

BMR Fabrication 2 Point Strut Tower Brace STB013

CODE: BMRSTB013

$199.95
BMR Fabrication
2010 Camaro Only. DOES NOT fit 2011+ model Requires drilling to install The fifth generation of Chevrolet's F-body is GM's most rigid platform... More

BMR Fabrication 22mm Rear Swaybar w/ Bushings & Billet End Links SB023

CODE: BMRSB023

$279.95
BMR Fabrication
BMR sway-bars decrease body roll in your 2005+ Mustang resulting in a more predictable, neutrally balanced suspension. BMR sway-bars are made from high... More

BMR Fabrication 35mm Front Swaybar SB022

CODE: BMRSB022

$189.95
BMR Fabrication
BMR sway-bars decrease body roll in your 2005+ Mustang resulting in a more predictable, neutrally balanced suspension. BMR sway-bars are made from high... More

BMR Fabrication 4 Point Strut Tower Brace - STB016

CODE: BMRSTB016

$229.95
BMR Fabrication
2010 Camaro Only. DOES NOT fit 2011+ model Minimize strut tower deflection in your 5th Gen Camaro with a 4-Point Strut Tower Brace from BMR... More

BMR Fabrication 4 Point Strut Tower Brace STB014

CODE: BMRSTB014

$329.95
BMR Fabrication
2010 Camaro Only. DOES NOT fit 2011+ model Requires drilling to install The fifth generation of Chevrolet's F-body is GM's most rigid... More

BMR Fabrication A Arm Support Brace AAS001

CODE: BMRAAS001

$59.95
BMR Fabrication
Application: 2005 - 2011 Ford Mustang / GT500

BMR Fabrication Adj Lower "Street" Control Arms w/ poly bushing/rod-end combo TCA021

CODE: BMRTCA021

$259.95
BMR Fabrication
Stock control arms are marginal at best. Bushing deflection combined with control arm flex creates erratic handling and inconsistent rear end stability... More

BMR Fabrication Adjustable Lower "Race" Control Arms w/rod ends TCA020

CODE: BMRTCA020

$259.95
BMR Fabrication
Stock control arms are marginal at best. Bushing deflection combined with control arm flex creates erratic handling and inconsistent rear end stability... More

BMR Fabrication Adjustable Rear Toe Rods, Rod Ends TR004

CODE: BMRTR004

$349.95
BMR Fabrication
The toe rod is responsible for maintaining toe settings of the the rear wheels similar to tie rod ends on the front end. This ensures that the wheels... More

BMR Fabrication Adjustable Toe Rods, Poly Bushings TR003

CODE: BMRTR003

$249.95
BMR Fabrication
The toe rod is responsible for maintaining toe settings of the the rear wheels similar to tie rod ends on the front end. This ensures that the wheels... More

BMR Fabrication Adjustable Tubular A-Arms AA019

CODE: BMRAA019

$579.95
BMR Fabrication
BMR tubular A-arms are a lightweight alternative to your factory stamped steel arms. Offered in two styles, standard and adjustable. Both models feature... More

BMR Fabrication Adjustable Upper Control Arm w/poly bushing UTCA019

CODE: BMRUTCA019

$179.95
BMR Fabrication
The single upper control arm is responsible for maintaining pinion angle and preventing axle counter-rotation. This "3 link" style suspension is ideal for... More

BMR Fabrication Adjustable Upper Control Arm w/spherical bearing UTCA020

CODE: BMRUTCA020

$229.95
BMR Fabrication
The single upper control arm is responsible for maintaining pinion angle and preventing axle counter-rotation. This "3 link" style suspension is ideal for... More

BMR Fabrication Billet Lower Control Arms w/poly bushings ACA004

CODE: BMRACA004

$329.95
BMR Fabrication
BMR heavy duty billet Control Arms are CNC machined from solid 1.25" x 2.5" billet 6061 T6 aluminum alloy. As described in our tubular control arms above,... More

BMR Fabrication Bump Steer Kit BAX105

CODE: BMRBAX105

$153.95
BMR Fabrication
Altering ride height can result in unwanted toe change during suspension travel. This is known as bump steer. Bumpsteer kits allow the user to alter the... More

BMR Fabrication Camber Bolts, Front 2° Offset FC001

CODE: BMRFC001

$39.95
BMR Fabrication
BMR's 2 degree camber bolts are used for adjusting camber on the OE and aftermarket struts. The 2005+ Mustang has no camber adjustment from the factory. When... More

BMR Fabrication Chrome Moly "On-Car" Adjustable Panhard Rod w/rod ends MPHR012

CODE: BMRMPHR012

$189.95
BMR Fabrication
The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are made with small diameter tubing and rubber... More

BMR Fabrication Differential Bushing Kit EN001

CODE: BMREN001

$49.95
BMR Fabrication
3 link suspensions place excessive loads on the upper link bushings. In the '05, two bushings are responsible for handling the same torque load that 4... More

BMR Fabrication Differential Mount Bushing Kit, Full Bushing, Pro Version BK029

CODE: BMRBK029

$69.95
2010 Camaro 6.2L LS3, 2010 Camaro 6.2L L99, 2010 Camaro 3.6L LLT, 2011 Camaro 6.2L LS3, 2011 Camaro 6.2L L99, 2011 Camaro 3.6L LLT, 2012 Camaro 6.2L LS3, 2012 Camaro 6.2L L99, 2012 Camaro 3.6L LFX, 2012 Camaro ZL1 6.2L LSA, 2013 Camaro 6.2L LS3, 2013 Camaro 6.2L L99, 2013 Camaro 3.6L LFX, 2013 Camaro ZL1 6.2L LSA, 2014 Camaro 6.2L LS3, 2014 Camaro 6.2L L99, 2014 Camaro 3.6L LFX, 2014 Camaro ZL1 6.2L LSA / BMR Fabrication
BMR Differential Bushings minimize power robbing differential movement by replacing the OE soft rubber bushings with high durometer 4-piece... More

BMR Fabrication Differential Mount Bushing Kit, Street Version BK001

CODE: BMRBK001

$69.95
2010 Camaro 6.2L LS3, 2010 Camaro 6.2L L99, 2010 Camaro 3.6L LLT, 2011 Camaro 6.2L LS3, 2011 Camaro 6.2L L99, 2011 Camaro 3.6L LLT, 2012 Camaro 6.2L LS3, 2012 Camaro 6.2L L99, 2012 Camaro 3.6L LFX, 2012 Camaro ZL1 6.2L LSA, 2013 Camaro 6.2L LS3, 2013 Camaro 6.2L L99, 2013 Camaro 3.6L LFX, 2013 Camaro ZL1 6.2L LSA, 2014 Camaro 6.2L LS3, 2014 Camaro 6.2L L99, 2014 Camaro 3.6L LFX, 2014 Camaro ZL1 6.2L LSA / BMR Fabrication
BMR Differential Bushings minimize power robbing differential movement by replacing the OE soft rubber bushings with high durometer 4-piece... More

BMR Fabrication Differential Mount Bushing Kit, White Delrin, Race Version BK026

CODE: BMRBK026

$149.95
2010 Camaro 6.2L LS3, 2010 Camaro 6.2L L99, 2010 Camaro 3.6L LLT, 2011 Camaro 6.2L LS3, 2011 Camaro 6.2L L99, 2011 Camaro 3.6L LLT, 2012 Camaro 6.2L LS3, 2012 Camaro 6.2L L99, 2012 Camaro 3.6L LFX, 2012 Camaro ZL1 6.2L LSA, 2013 Camaro 6.2L LS3, 2013 Camaro 6.2L L99, 2013 Camaro 3.6L LFX, 2013 Camaro ZL1 6.2L LSA, 2014 Camaro 6.2L LS3, 2014 Camaro 6.2L L99, 2014 Camaro 3.6L LFX, 2014 Camaro ZL1 6.2L LSA / BMR Fabrication
Eliminate differential movement and maximize driveline response in your high-horsepower 2010+ Camaro and Pontiac G8 with a set of Delrin Differential... More

BMR Fabrication DOM Double Adjustable Panhard Rod w/rod ends PHR012

CODE: BMRPHR012

$159.95
BMR Fabrication
The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are made with small diameter tubing and rubber... More

BMR Fabrication Drive Shaft Safety Loop DSL010

CODE: BMRDSL010

$109.95
BMR Fabrication
NHRA required for cars running 12.99 or quicker in the quarter mile. BMR Fabrication manufactures these loops out of NHRA legal 1/4" x 2" plate and both... More

BMR Fabrication Drive Shaft Safety Loop Package DLP001

CODE: BMRDLP001

$229.00
BMR Fabrication
NHRA required for cars running 12.99 or quicker in the quarter mile. BMR Fabrication manufactures these loops out of NHRA legal 1/4" x 2" plate and both... More

BMR Fabrication Driveshaft Safety Loop DSL014

CODE: BMRDSL014

$129.95
BMR Fabrication
Requires drilling to install Fits MANUAL V8 transmission and V6 AUTO. NHRA safety regulations requires a front driveshaft safety loop for... More

BMR Fabrication Driveshaft Safety Loop, Front, Auto Transmission DSL015

CODE: BMRDSL015

$129.95
BMR Fabrication
Requires drilling to install Fits V8 AUTO transmission applications ONLY NHRA safety regulations requires a front driveshaft safety loop... More

BMR Fabrication Driveshaft Tunnel Brace DTB004

CODE: BMRDTB004

$89.95
BMR Fabrication
Stiffen up the chassis for greatly improved handling with Sub Frame Connectors from BMR Fabrication. Constructed of 1" x 1" x .120 wall rectangular tubing... More

BMR Fabrication Dual-Durometer Rear End Bushing EN001

CODE: BMREN001

$44.95
BMR Fabrication
3 link suspensions place excessive loads on the upper link bushings. In the S197 Mustang, two bushings are responsible for handling the same torque load... More

BMR Fabrication End Link Mounting Brace, Rear Lower Control Arm ELK009

CODE: BMRELK009

$49.95
BMR Fabrication
The sway bar tabs on the OE control arm have proven to be failure-prone when stiffer aftermarket sway bars are installed. The nature of the design itself... More

BMR Fabrication Front & Rear Sway Bar Kit SBP010

CODE: BMRSBP010

$439.00
BMR Fabrication
  Description BMR sway-bars decrease body roll in your 2005+ Mustang resulting in a more predictable, neutrally balanced... More

BMR Fabrication Front 1" Lowering Springs, 220 Spring Rate, Pair SP020

CODE: BMRSP020

$129.95
BMR Fabrication
Description: Lowering the center of gravity not only provides visual appeal, it also dramatically improves the handling ability of... More

BMR Fabrication Front 1.4" Lowering Springs, 220 Spring Rate, Pair SP023

CODE: BMRSP023

$129.95
BMR Fabrication
Description: Lowering the center of gravity not only provides visual appeal, it also dramatically improves the handling ability of... More

BMR Fabrication Front Lower Control Arm Bushing Kit, Inner BK018

CODE: BMRBK018

$29.95
2010 Camaro 6.2L LS3, 2010 Camaro 6.2L L99, 2010 Camaro 3.6L LLT, 2011 Camaro 6.2L LS3, 2011 Camaro 6.2L L99, 2011 Camaro 3.6L LLT, 2012 Camaro 6.2L LS3, 2012 Camaro 6.2L L99, 2012 Camaro 3.6L LFX, 2012 Camaro ZL1 6.2L LSA, 2013 Camaro 6.2L LS3, 2013 Camaro 6.2L L99, 2013 Camaro 3.6L LFX, 2013 Camaro ZL1 6.2L LSA, 2014 Camaro 6.2L LS3, 2014 Camaro 6.2L L99, 2014 Camaro 3.6L LFX, 2014 Camaro ZL1 6.2L LSA / BMR Fabrication
Manufactured from low-deflection 88 durometer polyurethane, the BMR lower control arm bushings minimize control arm deflection to maintain consistent... More

BMR Fabrication Front Radius Rod Bushing Kit BK019

CODE: BMRBK019

$109.95
2010 Camaro 6.2L LS3, 2010 Camaro 6.2L L99, 2010 Camaro 3.6L LLT, 2011 Camaro 6.2L LS3, 2011 Camaro 6.2L L99, 2011 Camaro 3.6L LLT, 2012 Camaro 6.2L LS3, 2012 Camaro 6.2L L99, 2012 Camaro 3.6L LFX, 2012 Camaro ZL1 6.2L LSA, 2013 Camaro 6.2L LS3, 2013 Camaro 6.2L L99, 2013 Camaro 3.6L LFX, 2013 Camaro ZL1 6.2L LSA, 2014 Camaro 6.2L LS3, 2014 Camaro 6.2L L99, 2014 Camaro 3.6L LFX, 2014 Camaro ZL1 6.2L LSA / BMR Fabrication
BMR radius rod bushings minimize radius rod deflection maintaining consistent caster during aggressive handling maneuvers. The exclusive 3-piece... More

BMR Fabrication Front Suspension Bushing Kit BK022

CODE: BMRBK022

$149.95
2010 Camaro 6.2L LS3, 2010 Camaro 6.2L L99, 2010 Camaro 3.6L LLT, 2011 Camaro 6.2L LS3, 2011 Camaro 6.2L L99, 2011 Camaro 3.6L LLT, 2012 Camaro 6.2L LS3, 2012 Camaro 6.2L L99, 2012 Camaro 3.6L LFX, 2012 Camaro ZL1 6.2L LSA, 2013 Camaro 6.2L LS3, 2013 Camaro 6.2L L99, 2013 Camaro 3.6L LFX, 2013 Camaro ZL1 6.2L LSA, 2014 Camaro 6.2L LS3, 2014 Camaro 6.2L L99, 2014 Camaro 3.6L LFX, 2014 Camaro ZL1 6.2L LSA / BMR Fabrication
Maintain correct suspension alignment and improve overall handling in your 2010 Camaro with a Front Suspension Bushing Kit from BMR Fabrication.... More

BMR Fabrication Level 1 Handling Performance Package HPP018

CODE: BMRHPP018

$619.00
BMR Fabrication
Improve overall handling in your 2010 Camaro with a Level 1 Handling Performance Package from BMR Suspension. This kit consists of BMR Sway Bar Kit... More

BMR Fabrication Level 2 Handling Performance Package HPP019

CODE: BMRHPP019

$1,019.00
BMR Fabrication
Save over $90! Improve overall handling in your 2010 Camaro with a Level 2 Handling Performance Package from BMR Suspension. This kit consists... More

BMR Fabrication Level 3 Handling Performance Package HPP020

CODE: BMRHPP020

$1,339.00
BMR Fabrication
Save over $160! Improve overall handling in your 2010 Camaro with a Level 3 Handling Package from BMR Fabrication. This kit consists of BMR’s... More

BMR Fabrication Rear 1" Lowering Springs, 460 Spring Rate, Pair SP021

CODE: BMRSP021

$129.95
BMR Fabrication
Description: Lowering the center of gravity not only provides visual appeal, it also dramatically improves the handling ability of... More

BMR Fabrication Rear 1.4" Lowering Springs, 460 Spring Rate, Pair SP024

CODE: BMRSP024

$129.95
BMR Fabrication
Description: Lowering the center of gravity not only provides visual appeal, it also dramatically improves the handling ability of... More

BMR Fabrication Rear Billet Swaybar End Links SB025

CODE: BMRSB025

$119.95
BMR Fabrication
For use with BMR Sway Bars BMR sway-bars decrease body roll in your 2005+ Mustang resulting in a more predictable, neutrally balanced suspension. BMR... More

BMR Fabrication Rear Cradle Bushing Kit, Full Bushing, Pro Version BK024

CODE: BMRBK024

$249.95
2010 Camaro 6.2L LS3, 2010 Camaro 6.2L L99, 2010 Camaro 3.6L LLT, 2011 Camaro 6.2L LS3, 2011 Camaro 6.2L L99, 2011 Camaro 3.6L LLT, 2012 Camaro 6.2L LS3, 2012 Camaro 6.2L L99, 2012 Camaro 3.6L LFX, 2012 Camaro ZL1 6.2L LSA, 2013 Camaro 6.2L LS3, 2013 Camaro 6.2L L99, 2013 Camaro 3.6L LFX, 2013 Camaro ZL1 6.2L LSA, 2014 Camaro 6.2L LS3, 2014 Camaro 6.2L L99, 2014 Camaro 3.6L LFX, 2014 Camaro ZL1 6.2L LSA / BMR Fabrication
BMR cradle bushings enhance the rear stability of the vehicle by minimizing cradle movement. This provides a much more stabilized and predictable... More

BMR Fabrication Rear Cradle Bushing Kit, Inserts Only, Street Version BK016

CODE: BMRBK016

$159.95
BMR Fabrication
BMR cradle insert bushings enhance the rear stability of the vehicle by minimizing cradle movement. This provides a much more stabilized and... More

BMR Fabrication Rear Cradle Bushing Kit, Pro Version BK030

CODE: BMRBK030

$309.95
2010 Camaro 6.2L LS3, 2010 Camaro 6.2L L99, 2010 Camaro 3.6L LLT, 2011 Camaro 6.2L LS3, 2011 Camaro 6.2L L99, 2011 Camaro 3.6L LLT, 2012 Camaro 6.2L LS3, 2012 Camaro 6.2L L99, 2012 Camaro 3.6L LFX, 2012 Camaro ZL1 6.2L LSA, 2013 Camaro 6.2L LS3, 2013 Camaro 6.2L L99, 2013 Camaro 3.6L LFX, 2013 Camaro ZL1 6.2L LSA, 2014 Camaro 6.2L LS3, 2014 Camaro 6.2L L99, 2014 Camaro 3.6L LFX, 2014 Camaro ZL1 6.2L LSA / BMR Fabrication
Minimize wheel-hop and reduce rear cradle movement in your 2010 Camaro with a Rear Cradle Bushing Kit from BMR Fabrication. Manufactured from... More

BMR Fabrication Rear Cradle Bushing Kit, Street Version BK020

CODE: BMRBK020

$219.95
BMR Fabrication
Minimize wheel-hop and reduce rear cradle movement in your 2010 Camaro with a Rear Cradle/Differential Bushing Kit from BMR Fabrication. Manufactured... More

BMR Fabrication Rear Suspension Bushing Kit BK021

CODE: BMRBK021

$99.95
2010 Camaro 6.2L LS3, 2010 Camaro 6.2L L99, 2010 Camaro 3.6L LLT, 2011 Camaro 6.2L LS3, 2011 Camaro 6.2L L99, 2011 Camaro 3.6L LLT, 2012 Camaro 6.2L LS3, 2012 Camaro 6.2L L99, 2012 Camaro 3.6L LFX, 2012 Camaro ZL1 6.2L LSA, 2013 Camaro 6.2L LS3, 2013 Camaro 6.2L L99, 2013 Camaro 3.6L LFX, 2013 Camaro ZL1 6.2L LSA, 2014 Camaro 6.2L LS3, 2014 Camaro 6.2L L99, 2014 Camaro 3.6L LFX, 2014 Camaro ZL1 6.2L LSA / BMR Fabrication
This kit consists of the rear trailing arm bushings (BK006) and upper control arm bushings (BK017). BK017 - Decrease spindle counter-rotation under... More

BMR Fabrication Rear Trailing Arm Bushing, Outer BK006

CODE: BMRBK006

$39.95
2010 Camaro 6.2L LS3, 2010 Camaro 6.2L L99, 2010 Camaro 3.6L LLT, 2011 Camaro 6.2L LS3, 2011 Camaro 6.2L L99, 2011 Camaro 3.6L LLT, 2012 Camaro 6.2L LS3, 2012 Camaro 6.2L L99, 2012 Camaro 3.6L LFX, 2012 Camaro ZL1 6.2L LSA, 2013 Camaro 6.2L LS3, 2013 Camaro 6.2L L99, 2013 Camaro 3.6L LFX, 2013 Camaro ZL1 6.2L LSA, 2014 Camaro 6.2L LS3, 2014 Camaro 6.2L L99, 2014 Camaro 3.6L LFX, 2014 Camaro ZL1 6.2L LSA / BMR Fabrication
These bushings should be replaced any time the trailing arm is upgraded. Deflection in the factory bushings allows wheel-hop and inconsistent launch... More

BMR Fabrication Rear Tunnel Brace with Drive Shaft Safety Loop DSL011

CODE: BMRDSL011

$159.95
BMR Fabrication
NHRA required for cars running 12.99 or quicker in the quarter mile. BMR Fabrication manufactures these loops out of NHRA legal 1/4" x 2" plate and both... More

BMR Fabrication Rear Upper Control Arm Bushing Kit, Inner BK017

CODE: BMRBK017

$69.95
2010 Camaro 6.2L LS3, 2010 Camaro 6.2L L99, 2010 Camaro 3.6L LLT, 2011 Camaro 6.2L LS3, 2011 Camaro 6.2L L99, 2011 Camaro 3.6L LLT, 2012 Camaro 6.2L LS3, 2012 Camaro 6.2L L99, 2012 Camaro 3.6L LFX, 2012 Camaro ZL1 6.2L LSA, 2013 Camaro 6.2L LS3, 2013 Camaro 6.2L L99, 2013 Camaro 3.6L LFX, 2013 Camaro ZL1 6.2L LSA, 2014 Camaro 6.2L LS3, 2014 Camaro 6.2L L99, 2014 Camaro 3.6L LFX, 2014 Camaro ZL1 6.2L LSA / BMR Fabrication
Decrease spindle counter-rotation under acceleration by upgrading your OE rubber upper control arm bushing with a high durometer BMR polyurethane... More

BMR Fabrication Springs - Red, Set of 4, 1.0" Drop SP019

CODE: BMRSP019R

$249.95
BMR Fabrication
Lowering the center of gravity dramatically improves the handling of your Fifth gen F-Body. BMR lowering springs are specifically designed to provide... More

BMR Fabrication Springs - Red, Set of 4, 1.25" Front / 1.5" Rear Drop SP009

CODE: BMRSP009

$249.95
BMR Fabrication
BMR springs are specifically designed to provide optimal handling without sacrificing ride quality. The front springs are progressive wound to provide... More

BMR Fabrication Springs - Red, Set of 4, 1.4" Drop SP022

CODE: BMRSP022

$249.95
BMR Fabrication
Lowering the center of gravity dramatically improves the handling of your Fifth gen F-Body. BMR lowering springs are specifically designed to provide... More

BMR Fabrication Springs - Set of 4, 1.4" Front / 1" Rear Drop SP025

CODE: BMRSP025

$249.95
BMR Fabrication
Lowering the center of gravity not only provides visual appeal, it also dramatically improves the handling ability of your Camaro. BMR lowering springs are... More

BMR Fabrication Steering Rack Mount Bushing Kit BK008

CODE: BMRBK008

$19.95
BMR Fabrication
Manufactured from low-deflection polyurethane, the BMR rack mount bushing minimizes rack movement to maintain consistent toe during aggressive... More

BMR Fabrication Subframe Connectors SFC015

CODE: BMRSFC015

$249.95
BMR Fabrication
NOTE:  Installation of these sub frame connectors REQUIRES changing the tunnel brace to BMR Suspension part no. DTB004 Stiffen up the... More

BMR Fabrication Sway Bar End Links ELK004

CODE: BMRELK004

$319.95
BMR Fabrication
NOTE: compatible on 2012 models only when used with 2010/2011 style rear sway bars. * Reduce End Link deflection and increase sway bar... More

BMR Fabrication Swaybar Relocation Kit SRK001

CODE: BMRSRK001

$39.95
BMR Fabrication
The factory swaybar mounts won't clear a 15" drag wheel. Until now, racers have been cutting the brackets leaving no option other than eliminating the... More

BMR Fabrication Toe Rods TR002

CODE: BMRTR002

$129.95
BMR Fabrication
The toe rod is responsible for maintaining toe settings of the the rear wheels similar to tie rod ends on the front end. This ensures that the wheels... More

BMR Fabrication Total Suspension Bushing Kit, Pro Kit, BK031

CODE: BMRBK031

$529.95
2010 Camaro 6.2L LS3, 2010 Camaro 6.2L L99, 2010 Camaro 3.6L LLT, 2011 Camaro 6.2L LS3, 2011 Camaro 6.2L L99, 2011 Camaro 3.6L LLT, 2012 Camaro 6.2L LS3, 2012 Camaro 6.2L L99, 2012 Camaro 3.6L LFX, 2012 Camaro ZL1 6.2L LSA, 2013 Camaro 6.2L LS3, 2013 Camaro 6.2L L99, 2013 Camaro 3.6L LFX, 2013 Camaro ZL1 6.2L LSA, 2014 Camaro 6.2L LS3, 2014 Camaro 6.2L L99, 2014 Camaro 3.6L LFX, 2014 Camaro ZL1 6.2L LSA / BMR Fabrication
Minimize suspension deflection and improve overall handling in your 2010 Camaro with a Total Suspension Bushing Kit from BMR Fabrication.... More

BMR Fabrication Total Suspension Bushing Kit, Street Kit, BK023

CODE: BMRBK023

$439.95
BMR Fabrication
Minimize suspension deflection and improve overall handling in your 2010 Camaro with a Total Suspension Bushing Kit from BMR Fabrication. Manufactured... More

BMR Fabrication Trailing Arms TCA026

CODE: BMRTCA026

$149.95
BMR Fabrication
Stabilize caster settings and minimize wheelhop in your Fifth generation Camaro with a set of trailing arms from BMR Fabrication. Superior to the factory... More

BMR Fabrication Trailing Arms w/ Spherical Bearings TCA027

CODE: BMRTCA027

$279.95
BMR Fabrication
Stabilize caster settings and minimize wheelhop in your Fifth generation Camaro with a set of trailing arms from BMR Fabrication. Superior to the factory... More

BMR Fabrication Tubular "On-Car" Adjustable Panhard Rod PHR006

CODE: BMRPHR006

$139.95
BMR Fabrication
The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are made with small diameter tubing and rubber... More

BMR Fabrication Tubular A-Arms AA010

CODE: BMRAA010

$449.95
BMR Fabrication
BMR tubular A-arms are a lightweight alternative to your factory stamped steel arms. Offered in two styles, standard and adjustable. Both models feature... More

BMR Fabrication Tubular Lower Control Arms w/ Poly Bushings TCA019

CODE: BMRTCA019

$139.95
BMR Fabrication
Stock control arms are marginal at best. Bushing deflection combined with control arm flex creates erratic handling and inconsistent rear end stability... More

BMR Fabrication Tubular Lower Control Arms with poly bushing/spherical bearing combination TCA022

CODE: BMRTCA022

$209.95
BMR Fabrication
Stock control arms are marginal at best. Bushing deflection combined with control arm flex creates erratic handling and inconsistent rear end stability... More

BMR Fabrication Tubular Panhard Rod PHR005

CODE: BMRPHR005

$89.95
BMR Fabrication
The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are made with small diameter tubing and rubber... More

BMR Fabrication Tubular Sway Bar, Front 29mm SB016

CODE: BMRSB016

$239.95
BMR Fabrication
BMR swaybars are one of the most noticeable handling improvements you can do for your 2010 Camaro. From the factory, GM did a decent job with spring rates... More

BMR Fabrication Tubular Sway Bar, Rear 25mm SB017

CODE: BMRSB017

$179.95
BMR Fabrication
BMR swaybars are one of the most noticeable handling improvements you can do for your 2010 Camaro. From the factory, GM did a decent job with spring rates... More

BMR Fabrication Tubular Sway Bars SB030

CODE: BMRSB030

$409.95
BMR Fabrication
BMR swaybars are one of the most noticeable handling improvements you can do for your 2010 Camaro. From the factory, GM did a decent job with spring rates... More

BMR Fabrication Tubular Upper Control Arm w/poly bushing UTCA017

CODE: BMRUTCA017

$129.95
BMR Fabrication
The single upper control arm is responsible for maintaining pinion angle and preventing axle counter-rotation. This "3 link" style suspension is ideal for... More

BMR Fabrication Tubular Upper Control Arm w/spherical bearing UTCA018

CODE: BMRUTCA018

$169.95
BMR Fabrication
The single upper control arm is responsible for maintaining pinion angle and preventing axle counter-rotation. This "3 link" style suspension is ideal for... More

BMR Fabrication Upper Panhard Relocation Bracket PHR008

CODE: BMRPHR008

$69.95
BMR Fabrication
It has always been common practice to reinforce Ford's 8.8" rearend with a stronger, cast rear cover. Unfortunately, with the '05 model, the panhard rod... More

BMR Fabrication Upper Panhard Rod Support PHR007

CODE: BMRPHR007

$109.95
BMR Fabrication
Since the panhard rod is responsible for keeping the rear end centered in the chassis, their is a significant load placed on the panhard rod mounts during... More

BMR Fabrication Xtreme Anti Rollbar XSB005

CODE: BMRXSB005

$529.95
BMR Fabrication
Rear anti-roll bars have been proven to eliminate torque steer and body roll during hard launches and will drastically improve the cars consistency as well... More

BMR Suspension 1.2” Lowering Springs SP052

CODE: BMRSP052

$249.95
BMR Fabrication
  Description Lowering the center of gravity not only provides visual appeal, it also dramatically improves the handling... More

BMR Suspension - Brake Caliper Brackets - BCK003

CODE: BMRBCK003

$289.95
2010 Camaro 6.2L LS3, 2010 Camaro 6.2L L99, 2010 Camaro 3.6L LLT, 2011 Camaro 6.2L LS3, 2011 Camaro 6.2L L99, 2011 Camaro 3.6L LLT, 2012 Camaro 6.2L LS3, 2012 Camaro 6.2L L99, 2012 Camaro 3.6L LFX, 2012 Camaro ZL1 6.2L LSA, 2013 Camaro 6.2L LS3, 2013 Camaro 6.2L L99, 2013 Camaro 3.6L LFX, 2013 Camaro ZL1 6.2L LSA, 2014 Camaro 6.2L LS3, 2014 Camaro 6.2L L99, 2014 Camaro 3.6L LFX, 2014 Camaro ZL1 6.2L LSA / BMR Fabrication
These brackets are designed to be used with BMR's machined rear spindles when using the BMR/Wilwood 15" Wheel Conversion Components. CNC machined from... More

BMR Suspension - Drag Race Suspension Package DRP007

CODE: BMRDRP007

$1,279.00
BMR Fabrication
  Description This package consists of all the suspension components necessary to convert to 16" Drag wheels. Kit... More

BMR Suspension - Machined OE Spindles -SPD001

CODE: BMRSPD001

$699.95
2010 Camaro 6.2L LS3, 2010 Camaro 6.2L L99, 2010 Camaro 3.6L LLT, 2011 Camaro 6.2L LS3, 2011 Camaro 6.2L L99, 2011 Camaro 3.6L LLT, 2012 Camaro 6.2L LS3, 2012 Camaro 6.2L L99, 2012 Camaro 3.6L LFX, 2012 Camaro ZL1 6.2L LSA, 2013 Camaro 6.2L LS3, 2013 Camaro 6.2L L99, 2013 Camaro 3.6L LFX, 2013 Camaro ZL1 6.2L LSA, 2014 Camaro 6.2L LS3, 2014 Camaro 6.2L L99, 2014 Camaro 3.6L LFX, 2014 Camaro ZL1 6.2L LSA / BMR Fabrication
These are new OE spindles that have been CNC machined to accept BMR's BCK003 caliper brackets for use with Wilwood calipers and rotors. Designed for use... More

BMR Suspension - Total Suspension Bushing Kit (2012+) - BK042

CODE: BMRBK042

$439.95
2012 Camaro 6.2L LS3, 2012 Camaro 6.2L L99, 2012 Camaro 3.6L LFX, 2012 Camaro ZL1 6.2L LSA, 2013 Camaro 6.2L LS3, 2013 Camaro 6.2L L99, 2013 Camaro 3.6L LFX, 2013 Camaro ZL1 6.2L LSA, 2014 Camaro 6.2L LS3, 2014 Camaro 6.2L L99, 2014 Camaro 3.6L LFX, 2014 Camaro ZL1 6.2L LSA / BMR Fabrication
Minimize suspension deflection and improve overall handling in your 2012-2013 Camaro with a Total Suspension Bushing Kit from BMR Suspension. Manufactured... More

BMR Suspension 2-Point Strut tower Brace - STB017

CODE: BMRSTB017

$119.95
BMR Fabrication
Minimize strut tower deflection in your 5th Gen Camaro with a bolt-in Strut Tower Brace from BMR Suspension. Constructed from a combination of 1.25”... More

Please choose a finish/color


BMR Suspension A-arms, Lower, Adjustable, Delrin/Rod End, 18mm Tall Ball Joint (2005-2009) AA024

CODE: BMRAA024

$589.95
BMR Fabrication
Description Correct the suspension geometry on your lowered S197... More

BMR Suspension A-arms, Lower, Adjustable, Delrin/Rod End, 19mm Tall Ball Joint (2010-2012) AA026

CODE: BMRAA026

$589.95
BMR Fabrication
  Description Correct the suspension geometry on your lowered S197 Mustang with a set of Handling A-arms from BMR... More

BMR Suspension A-arms, Lower, Adjustable, Delrin/Rod-end, 19mm Standard Height Ball Joint (2010-2012) AA022

CODE: BMRAA022

$589.95
BMR Fabrication
Description Improve handling response and reduce weight in your... More

BMR Suspension A-arms, Lower, Non-adj, Poly/Delrin, 18mm Tall Ball Joint (2005-2009) AA023

CODE: BMRAA023

$459.95
BMR Fabrication
Description Correct the suspension geometry on your lowered S197... More

BMR Suspension A-arms, Lower, Non-adj, Poly/Delrin, 19mm Standard Height Ball Joint (2010-2012) AA021

CODE: BMRAA021

$459.95
BMR Fabrication
Description Improve handling response and reduce weight in your... More

BMR Suspension A-arms, Lower, Non-adjustable, Poly/Delrin, 19mm Tall Ball Joint (2010-2012) AA025

CODE: BMRAA025

$459.95
BMR Fabrication
Description Correct the suspension geometry on your lowered S197... More

BMR Suspension Adjustable Front Sway Bar Kit With Bushings, 29mm - SB038

CODE: BMRSB038

$239.95
2013 Camaro 6.2L LS3, 2013 Camaro 6.2L L99, 2013 Camaro 3.6L LFX, 2013 Camaro ZL1 6.2L LSA, 2014 Camaro 6.2L LS3, 2014 Camaro 6.2L L99, 2014 Camaro 3.6L LFX, 2014 Camaro ZL1 6.2L LSA / BMR Fabrication
BMR swaybars are one of the most noticeable handling improvements you can do for your 2013 Camaro. From the factory, GM did a decent job with spring rates... More

Please Choose a Color


BMR Suspension Billet Arm Anti-Wheelhop Package AWP002

CODE: BMRAWP002

$469.00
BMR Fabrication
  Description Stop wheel hop problems with the BMR Anti-wheelhop Package - Consists of Tubular Lower Control arms... More

ONLY Brackets have a color option. Arms are all black anodized.


BMR Suspension Coilover Conversion Kit, Rear Upper Mount - CCK004

CODE: BMRCCK004

$179.95
2010 Camaro 6.2L LS3, 2010 Camaro 6.2L L99, 2010 Camaro 3.6L LLT, 2011 Camaro 6.2L LS3, 2011 Camaro 6.2L L99, 2011 Camaro 3.6L LLT, 2012 Camaro 6.2L LS3, 2012 Camaro 6.2L L99, 2012 Camaro 3.6L LFX, 2012 Camaro ZL1 6.2L LSA, 2013 Camaro 6.2L LS3, 2013 Camaro 6.2L L99, 2013 Camaro 3.6L LFX, 2013 Camaro ZL1 6.2L LSA, 2014 Camaro 6.2L LS3, 2014 Camaro 6.2L L99, 2014 Camaro 3.6L LFX, 2014 Camaro ZL1 6.2L LSA / BMR Fabrication
This kit converts the rear upper shock mount to a coil-over mount. Manufactured from strong, yet lightweight 1/8" 4130 chrome moly plate. Designed to work... More

BMR Suspension Delrin® Rear Cradle & Differential Mount Bushing Kit BK028

CODE: BMRBK028

$759.95
2010 Camaro 6.2L LS3, 2010 Camaro 6.2L L99, 2010 Camaro 3.6L LLT, 2011 Camaro 6.2L LS3, 2011 Camaro 6.2L L99, 2011 Camaro 3.6L LLT, 2012 Camaro 6.2L LS3, 2012 Camaro 6.2L L99, 2012 Camaro 3.6L LFX, 2012 Camaro ZL1 6.2L LSA, 2013 Camaro 6.2L LS3, 2013 Camaro 6.2L L99, 2013 Camaro 3.6L LFX, 2013 Camaro ZL1 6.2L LSA, 2014 Camaro 6.2L LS3, 2014 Camaro 6.2L L99, 2014 Camaro 3.6L LFX, 2014 Camaro ZL1 6.2L LSA / BMR Fabrication
Eliminate rear cradle movement in your 2010-2011 Camaro with a Delrin Rear Cradle Bushing Kit from BMR Suspension. These bushings are CNC-machined from... More

BMR Suspension Delrin® Rear Cradle Bushing Kit BK027

CODE: BMRBK027

$699.95   $629.95
-10%
2010 Camaro 6.2L LS3, 2010 Camaro 6.2L L99, 2010 Camaro 3.6L LLT, 2011 Camaro 6.2L LS3, 2011 Camaro 6.2L L99, 2011 Camaro 3.6L LLT, 2012 Camaro 6.2L LS3, 2012 Camaro 6.2L L99, 2012 Camaro 3.6L LFX, 2012 Camaro ZL1 6.2L LSA, 2013 Camaro 6.2L LS3, 2013 Camaro 6.2L L99, 2013 Camaro 3.6L LFX, 2013 Camaro ZL1 6.2L LSA, 2014 Camaro 6.2L LS3, 2014 Camaro 6.2L L99, 2014 Camaro 3.6L LFX, 2014 Camaro ZL1 6.2L LSA / BMR Fabrication
Eliminate rear cradle movement in your 2010-2011 Camaro with a Delrin Rear Cradle Bushing Kit from BMR Suspension. These bushings are CNC-machined from... More

BMR Suspension Drag Race Package (Level 1) DRP001

CODE: BMRDRP001

$949.00
BMR Fabrication
  Description BMR Level 1 and Level 2 Drag Race Packages are the best way to hook up the rear of your S197 Mustang.... More

BMR Suspension Drag Race Package (Level 2) DRP002

CODE: BMRDRP002

$1,589.00
BMR Fabrication
  Description Our Level 2 Package is recommended for the serious racer and has already been proven on BMR's 7 Second... More

BMR Suspension Front & rear Sway Bar Kit w/ Bushings - SB039

CODE: BMRSB039

$509.95
2013 Camaro 6.2L LS3, 2013 Camaro 6.2L L99, 2013 Camaro 3.6L LFX, 2013 Camaro ZL1 6.2L LSA, 2014 Camaro 6.2L LS3, 2014 Camaro 6.2L L99, 2014 Camaro 3.6L LFX, 2014 Camaro ZL1 6.2L LSA / BMR Fabrication
This kit consists of a SB038 front sway bar and SB033 rear sway bar plus bushings. GM did a decent job with spring rates and sway bars but the Camaro... More

Please Choose Color


BMR Suspension Front End Package (adjustable) FEP002

CODE: BMRFEP002

$1,009.00
BMR Fabrication
Description Drops up to 34 lbs. off the nose of your car and creates... More

BMR Suspension Handling Performance Package, Coupe (Level 1) HPP001

CODE: BMRHPP001

$1,789.00
BMR Fabrication
  Description A step above our Lowering Package, these packages also address spring dampening, body roll, and chassis... More

BMR Suspension Handling Performance Package, Coupe (Level 2) HPP003

CODE: BMRHPP003

$2,419.00
BMR Fabrication
  Description A step above our Lowering Package, these packages also address spring dampening, body roll, and chassis... More